| home | products | checkout | contact  
  PRODUCTS      



Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

 
Holochess Knob Set

 

1 set of 10 Holochess Table Knobs machined from 6061 Aluminum. Each has a 6mm hole in the back side for mounting on a switch.

 

 

Price: $90.00

Holochess Top
1 of 2

24" diameter, 1/8" thick aluminum plate that has been spin-grained and allowed to oxidize so fingerprints don't embed into the surface. While every effort is made for perfection, there are inhererant places in the material that do not grain perfectly and there can be a very slight divit where the laser pierces the material for cutting.

Cannot ship to the UK due to new VAT requirements. Orders to the UK have to be greather than $180 USD plus shipping.

As international shipping is very expensive due to the box size, if you are outside the US, select shipping - "Everywhere Else", and I'll send you a shipping quote. Be aware the cost is estimated between $60 and $100+ outside the US. Somewhat less to Canada.

 

 

Price: $183.50

R2-D2 CS:R
1 of 2

These skins have been updated to make them easier to prepare, will show which panels always get removed, and include a coin return flat-pack, which you can use to assemble your own coin returns that can glue to the coin return faces, which are also provided as part of the rolled outside skins.

R2-D2 CS:R Aluminum Skin. This skin is very nicely laser cut, deburred and rolled in 4 pieces. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via UPS ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will probably not receive communications from the store.

I'll apologize in advance for the cost to ship outside the U.S. It keeps rising.

Price: $295.00

Fringe Dress Brass Lapel Pin

 


Polished brass Fringe Division pins seen on dress uniforms in the Season 4 episode "The Consultant" during the funeral. 1.025" tall with a single pin clasp on the back.

Price shown here includes postage.

Patch not included, shown for scale only
 

 

Price: $15.00

R2-D2 CS:Rh
1 of 2

*** I have one set of the last version of these skins available. They do not have the revised back update, which some may find to be a benefit, nor do they come with the coin return flat pack. $150 plus shipping. If you want them email me philip@rebelscum.com. ***

These skins have been updated to make them easier to prepare, will show which panels always get removed, and include a coin return flat-pack, which you can use to assemble your own coin returns that can glue to the coin return faces, which are also provided as part of the rolled outside skins.

R2-D2 CS:Rh (Holmes Frame Specific Aluminum Skin). This skin is very nicely laser cut, deburred and rolled in 4 pieces. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via UPS ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.
 
Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will not receive communications from the store.

 

Price: $295.00

Fett1

This is a Boba Fett jetpack greeblie machined to match the found part, including the important correct pitch on the knurled end. The tip does not unscrew like the found part, but displays the same.
 

Price: $35.00

R2-D2 CS:L
1 of 2

R2-D2 CS:L Aluminum Skin. This skin is very nicely laser cut and rolled in 4 pieces. The rolling is complete, and will roll all the small panels as well. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via UPS ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will not receive communications from the store.

 
 
Price: $275.00

R2-D2 Curved Rear Logic Display
1 of 3

R2-D2 Curved Rear Logic Display. Includes aluminum outer bezel, aluminum inner bezel, both with matching curve to replica R2's display fiber mount. Clear overlay acrylic, three different fiber location acrylics, so you can choose 112 fibers arrayed "wonky", like R2, somewhat less wonky, and one that holds 96 fibers, in case you want to keep your current electronics (from joymonkey). You will need to redo your fiber optics.

You may also choose to include front logic displays with this order. 

 

 

Front-Logic-Display
None
Pair (+$60.00)
Price: $175.00

R2-D2 Flat Rear Logic Display Bezel

R2-D2 Flat Rear Logic Display bezel. 

 

 

Price: $135.00

R2-D2 Holmes Side Plates
1 of 2

Holmes Frame Side Plate Set. Comes with hardware and driling template.

This cannot be purchases for the EU or UK due to VAT collection requirements. Orders shipping there must be at least $180 plus shipping. Please conact me if you wish to order additional items to get to that minimum.

 

 

Price: $140.00

R2-D2 Wide-Mouth Holo-Projector
1 of 13

Note: If you are buying more than 1 HP, selected qty 1 and the options and mounting location you want for that one, and add to cart. Then, subsequently, do the same thing for the next ones. This matters as the mounting rings are custom drilled for the three locations, front, back and top.

These Holo-Projectors are spec in the visible part, but have a dramatically larger rear access opening, and are very large inside, with two different "steps" you can use to mount electronics. They come with 2 sets of laser cut acrylics you can customize for your application. A lens and retaining ring are installed in each HP.

 

 

 

 

Price: $112.00

R2-D2 Front Logic Display Bezels

R2-D2 Front Logic Display bezels (pair). 

UK Order Note: Orders shipping to the UK must be at least $180 plus shipping. Details here ->   https://rebelscum.com/ukvat.asp

 

Price: $65.00

R2-D2 HP Mounting Rings

These rings are used to mount a Holo-Projector using shouds offered with my Holo-Projectors. They also fit BobC mounting rings. Use this item if you only need the mounting rings. Put in the notes if this is for front / rear, or top location.

 

 

 

Price: $40.00

R2-D2 HP Servo Mount

This is a servo mount, mount hardware, and servo screws. This mount fits both my HP mounting rings, as well as the BobC rings.

 

 

 

Price: $40.00

R2-D2 HP Wide Mouth Slip Ring Adapter

This is a Wide Mouth HP slip ring adapter. It only works with my Wide Mouth HPs.

 

 

 

Price: $80.00

« Previous | 1 | 2 | 3 | »

Skytower Props, Inc.
101 Marshall Creek Rd.
Roanoke, TX 76262
(214) 207-7355

 

     
 

Copyright © Skytower Props, Inc.2021