| home | products | checkout | contact  
  PRODUCTS      



Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

 
FettRocket

Boba Fett replica rocket, complete with accurate copper tip. This rocket is based off actual measurements of a real piece and comes in 3 pieces, which screw together. This is a new version for 2018, and is the most accurate replica ever made.

Price includes shipping to domestic U.S. addresses. Please select shipping location below.
 

Price: $250.00

R2-D2 Dome Bullets
1 of 2

R2-D2 Dome Alignment Bullet set of 6. These are threaded 10-32 x .25" diameter, giving you more precise adjustment than 10-24 threads. Drill your dome ring to just slip over the bullets, add a slight chamfer, and these will enable quick and easier alignment and removal of dome. Your current screws may be 10-24, so be sure and check.

There is an option to also order stainless screws and nuts that fit the Rockler bearings and dome bullets.

UK Order Note: Orders shipping to the UK must be at least $180 plus shipping. Details here ->   https://rebelscum.com/ukvat.asp

Screws/Nuts
No Screws
6 screws 18 nuts (+$5.00)
Price: $30.00

1 Replica TI Exacta 20 Bubblestrip

 


If out of stock, email philip@rebelscum.com with plans to purchase and I'll advise next run schedule.

Replica TI Exactra 20 Bubble Strip (this is the one with all 7 bubbles) for your custom lightsaber build. This is essentially a perfect copy, indistiguishable from a real TI bubble strip. It will come with the ends sanded off so it can't be used to actually replace a TI strip in a calculator maliciously.

Price $30.00, + $6.00 US domestic shipping. Elsewhere is +$7.50.

How to prepare strips for your saber install can be found at THERPF.com here: http://www.therpf.com/showthread.php?t=62238

Please be aware that while these look identical to a real bubble strip, the plastic is not as forgiving if you bend it. It will snap before a real one will, so be careful when handling.
 

 

Price: $36.00
Out of Stock

R2-D2 Dome Topper
1 of 5

This is a replica of one of the real R2 dome toppers. It happens to be the one I took photos of when I was around this particular R2 when Don Bies had it at Steve Sansweet's Rancho Obi-Wan for a photo shoot years ago. Of all the toppers I've seen, it's the most interesting since it has a beveled edge instead of just being rounded over.

It's aluminum and made in two pieces, so finishing is easy. It fits into the hole inside Daren's alum dome, and is held with an included 1/4" ss washer and ss 1/4-28 nut.

UK Resident VAT Disclosure: https://www.rebelscum.com/ukvat.asp

Price: $20.00

R2-D2 Maxdrive Pro

This kit includes precision machined parts used to build a MaxDrive designed by Maxstang in the Astromech R2 forum. This is all the parts you could have waterjet or laser cut by a service provider. The difference is these parts are machined to tolerances that will allow you to most likely do a straight-forward assembly. The parts will come unassembled, but you can see what they look like in the photo.

These have a more robust attachment between the plates and the eccentric axle mount is machined from a single piece.

There is an option to order the ten 1/2" x 1-3/4" aluminum spacers and bolts, which will save you a little money over McMaster.

International shipping is quite expensive as the pair weigh 5lbs, which requires Priority postage.

Please see Maxstang's Maxdrive thread here: https://astromech.net/forums/showthread.php?40891

 

 

 

 

Maxdrive Spacers
None
10 Spacers / bolts (+$30.00)
Price: $295.00
Out of Stock

R2-D2 232 Maxdrive Pro

This kit includes precision machined parts used to build a 232 MaxDrive designed by Maxstang in the Astromech R2 forum.

There is an option to order the ten 1/2" x 1-3/4" aluminum spacers and bolts, which will save you a little money over McMaster.

You should only buy this if you have been in contact with Maxstang, and know this is just part of the items necessary to implement his design. These parts only work with styrene feet.

Shown with spacers and bolts, which are optional.

 

 

 

 

Maxdrive Spacers
None
10 Spacers / bolts (+$30.00)
Price: $695.00

R2-D2 HP Slip Ring

Set of three 6-wire slip rings. This is the same slip ring included with the Kid-Proof Holo Projector upgrades.

UK Order Note: Orders shipping to the UK must be at least $180 plus shipping. Details here ->   https://rebelscum.com/ukvat.asp

Price: $44.00

R2-D2 HP Slip Ring Mount BobC Qty 1 Only
1 of 4

BobC Version. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> https://www.rebelscum.com/kidproof.asp

Servo Screws 1
4 screws
8 screws (+$1.00)
Filthy Adapter 1
No adapter
Adapter for Filthy LED (+$1.00)
Price: $95.00

R2-D2 HP Slip Ring Mount BobC Qty 3 Only
1 of 4

BobC Version. Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 3
4 screws
8 screws (+$3.00)
Filthy Adapter 3
No adapter
Adapter for Filthy LED (+$3.00)
Price: $280.00

R2-D2 HP Slip Ring Mount Dave Shaw Qty 1 Only
1 of 4

Dave Shaw Version. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 1
4 screws
8 screws (+$1.00)
Filthy Adapter 1
No adapter
Adapter for Filthy LED (+$1.00)
Price: $95.00

R2-D2 HP Slip Ring Mount Dave Shaw Qty 3 Only
1 of 4

Dave Shaw Version.  Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 3
4 screws
8 screws (+$3.00)
Filthy Adapter 3
No adapter
Adapter for Filthy LED (+$3.00)
Price: $280.00

R2-D2 HP Slip Ring Mount Jason (Pwrsrce) Long Qty 1 Only
1 of 4

Jason (Pwrsrce) Version - Long Threads. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

This version has about 1/4" of threads that screw into the back of the HP. If you have less threads, you want the Jason-Short version.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 1
4 screws
8 screws (+$1.00)
Filthy Adapter 1
No adapter
Adapter for Filthy LED (+$1.00)
Price: $95.00

R2-D2 HP Slip Ring Mount Jason (Pwrsrce) Long Qty 3 Only
1 of 4

Jason (Pwrsrce) Version - Long Threads.  Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

This version has about 1/4" of threads that screw into the back of the HP. If you have less threads, you want the Jason-Short version.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.
 
Servo Screws 3
4 screws
8 screws (+$3.00)
Filthy Adapter 3
No adapter
Adapter for Filthy LED (+$3.00)
Price: $280.00

R2-D2 HP Slip Ring Mount Jason (Pwrsrce) Short Qty 1 Only
1 of 4

Jason (Pwrsrce) Version - Short Threads. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

This version has about 1/8" of threads that screw into the back of the HP. If you have more threads, you want the Jason-Long version.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 1
4 screws
8 screws (+$1.00)
Filthy Adapter 1
No adapter
Adapter for Filthy LED (+$1.00)
Price: $95.00

R2-D2 HP Slip Ring Mount Jason (Pwrsrce) Short Qty 3 Only
1 of 4

Jason (Pwrsrce) Version - Short Threads. Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

This version has about 1/8" of threads that screw into the back of the HP. If you have more threads, you want the Jason-Long version.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 3
4 screws
8 screws (+$3.00)
Filthy Adapter 3
No adapter
Adapter for Filthy LED (+$3.00)
Price: $280.00

« Previous | 1 | 2 | 3 | »

Skytower Props, Inc.
101 Marshall Creek Rd.
Roanoke, TX 76262
(214) 207-7355

 

     
 

Copyright © Skytower Props, Inc.2021